■ 商品説明 The Triple Elastic Magazine Pouch (TEMP) was designed as a three cell 5.56 mag holder to give users superior retention of magazines and other mission critical equipment while maintaining a slim profile. - The TEMP is a perfect companion to the Micro Fight MkV chassis, but can also be attached to molle cummerbunds, back panels, or backpacks. - The use of elastic creates form fitting cells that can hold a variety different items. The stretchy nature of elastic allows it to expand to accommodate large or oddly shaped pieces of equipment. - Unlike other elastic pouches on the market, the TEMP has the ability to utilize an included bungee retention kit. The ported tab at the top of the TEMP can also be used to assist in indexing magazines or equipment into the pouch. - We also added loop on the outside of the TEMP to allow for the attachment of indicator patches or to allow you to run the standard Pangolin Flap, or the Sub-Gun Pangolin Flap. - The back of the TEMP has tiedown points for either the included retention kit or to secure equipment to the pouch itself via cordage. - The TEMP is more than just a mag pouch. It can be used to retain a wide variety of tools, tourniquets, or throwables. - The TEMP can also be direct mounted to the front of the Thing 3 Chest Rig for a low profile setup, or onto the sides of the 34 Alpha Split Chest Rig. ■ 注意事項（ご購入前に必ずご確認ください） ・本商品は本物になり、海外製品のため、新品であっても擦れ・小傷・若干の汚れなどが見られる場合がございます。予めご了承ください。 ・ご利用のモニター環境により、実際の色味と異なる場合がございます。 ・迷彩柄は生地の取り位置により一点一点異なります。柄の出方はお選びいただけません。 ・製品仕様はメーカーの予告なく変更となる場合がございます。予めご了承ください。 ・お客様のご都合による返品・キャンセルはお受けできませんので、あらかじめご了承ください。

■ 商品説明 The Expander Wing Mk-2 was built as direct replacement for the original Spiritus Systems Micro Fight Expander Wing Set with a focus on enhancing the product’s functionality for Plate Carriers. - The wing attaches to a Micro Fight Chassis or 556 Placard with a hook & loop flap and can be mounted for increased storage capacity on a chest rig or under the Cummerbund of a LV-119. - Unlike its predecessor, the Expander Wing Mk-2 is completely reversible, and can be used on either the right or left side of the torso without any reduction in functionality or storage capacity. - Spiritus Systems sells the Expander Wing Mk-2 individually for end users who do not require a full set for their loadout. (Reminder: If you want a set of these, make sure to add TWO to the cart.) - Wings used for chest rigs are mounted to the soft loop field on the back side of the Micro Fight Chest Rig. They also utilize our unique loop over design that attaches to your Fat Straps to ensure a comfortable and stable attachment that will not sag even with heavy items placed inside. - When used in conjunction with plate carriers, the Expander Wing Mk-2 will integrate with both hook & loop and TUBES cummerbunds. - The wing features a TUBES bar pass-through so the cummerbund can be attached or separated without the need to remove the expander wing. - The Expander Wing Mk-2 is designed to hug the body which reduces their signature and securely holds items in place. - The base Expander Wing Mk-2 pocket depth is 6" however, the adjustable internal retention strap can be lengthened or shortened to create the perfect pocket depth for your items. - The top of the pocket also features double eyelets and a bungee retention kit, so radios and magazines remain secure during periods of movement. - The expander wing will hold most small & medium caliber rifle magazines as well as a variety of radio platforms like the MPU5, 152, 163, and smaller units like Motorola XTS 5000. ■ 注意事項（ご購入前に必ずご確認ください） ・本商品は本物になり、海外製品のため、新品であっても擦れ・小傷・若干の汚れなどが見られる場合がございます。予めご了承ください。 ・ご利用のモニター環境により、実際の色味と異なる場合がございます。 ・迷彩柄は生地の取り位置により一点一点異なります。柄の出方はお選びいただけません。 ・製品仕様はメーカーの予告なく変更となる場合がございます。予めご了承ください。 ・お客様のご都合による返品・キャンセルはお受けできませんので、あらかじめご了承ください。

■ 商品説明 The JSTA Pouch was designed as a space saving solution for battle belts and other platforms with MOLLE mounting points. The pouch features two inline stacked compartments that allow the end user to combine their magazine holders with a GP pouch in a small form factor. The inner sleeve is lined with loop fields that will accept the following Spiritus Systems magazine inserts: ■ 注意事項（ご購入前に必ずご確認ください） ・本商品は本物になり、海外製品のため、新品であっても擦れ・小傷・若干の汚れなどが見られる場合がございます。予めご了承ください。 ・ご利用のモニター環境により、実際の色味と異なる場合がございます。 ・迷彩柄は生地の取り位置により一点一点異なります。柄の出方はお選びいただけません。 ・製品仕様はメーカーの予告なく変更となる場合がございます。予めご了承ください。 ・お客様のご都合による返品・キャンセルはお受けできませんので、あらかじめご了承ください。

■ 商品説明 The Mutant Pouch is a multi-purpose sustainment storage solution that can be mounted to any MOLLE surface with four columns. - The pouch is divided into two main compartments and is built with a mixture of Cordura and Nylon Laminate Fabrics. - The main compartment features a top flap with double retention (hook/loop & Fastex Buckle Closure) and is designed to hold a high-capacity radio battery (like the BB-2590), 5x 5.56 STANAG magazines stacked parallel to the body, 5.56 link, or any other similar sized items. The double closure gives the user multiple gear retention options and will reduce slop in the pouch. - The secondary compartment will securely hold a handheld radio unit via elastic retention loop and an adjustable shock cord retention lanyard. Radios like the Harris 152 and Persistent Systems MPU5 are compatible, as well as a whole range of other smaller handhelds like Baofeng and Motorola products. The retention lanyard can be adjusted for radio height, and is connected with a fastex buckle at the base so that the operator can easily remove the radio from the pouch, even with tall antennas. - This compartment will also hold 16oz water bottles and other accessories. - The Mutant serves as the foundational pouch for the 34A Split Rig System, and when paired with a SPUD pouch on each panel, end users now have access to a full-featured sustainment chest rig platform that can accommodate a wide variety of weapon and radio systems. The back side of the main compartment also features two MOLLE columns and lashing points for variety of other accessories. This area is great for outboard TQ retention, or mounting a Liberty Dynamic Flashbang Pouch. ■ 注意事項（ご購入前に必ずご確認ください） ・本商品は本物になり、海外製品のため、新品であっても擦れ・小傷・若干の汚れなどが見られる場合がございます。予めご了承ください。 ・ご利用のモニター環境により、実際の色味と異なる場合がございます。 ・迷彩柄は生地の取り位置により一点一点異なります。柄の出方はお選びいただけません。 ・製品仕様はメーカーの予告なく変更となる場合がございます。予めご了承ください。 ・お客様のご都合による返品・キャンセルはお受けできませんので、あらかじめご了承ください。

■ 商品説明 There are plenty of GP pouches out there on the market, but this one is more than your average General Purpose pouch. Using feedback from service members of multiple organizations, we've expanded what a GP pouch can be. The Medium GP Pouch features a front pocket for storing items like VS-17 panels or SSE bags. The Mk3 model of the GP did away with the stretch material on the front pocket, instead featuring color-matched 500D Cordura Nylon. We improved our attachment system based on user feedback. Tighter weaving to keep the pouch secure to your vest and a belt pass through have been added without additional weight to the pouch. It merges the best of both worlds by utilizing webbing and low-profile, high-strength Tegris. The Tegris provides an ultralight and thin mounting solution, which pairs perfectly with the webbing attachment straps, providing extreme strength and ease of weaving. The inside of the pouch is lined with loop and accepts our Pouch Insert Suite. Together, this pouch can change the way you store your body-worn equipment. Dimensions (Approximate) Height 6" x Width 7" x Depth 2" ■ 注意事項（ご購入前に必ずご確認ください） ・本商品は本物になり、海外製品のため、新品であっても擦れ・小傷・若干の汚れなどが見られる場合がございます。予めご了承ください。 ・ご利用のモニター環境により、実際の色味と異なる場合がございます。 ・迷彩柄は生地の取り位置により一点一点異なります。柄の出方はお選びいただけません。 ・製品仕様はメーカーの予告なく変更となる場合がございます。予めご了承ください。 ・お客様のご都合による返品・キャンセルはお受けできませんので、あらかじめご了承ください。

■ 商品説明 Small GP Pouch There are plenty of GP pouches out there on the market, but this one is more than your average General Purpose pouch. Using feedback from service members of multiple organizations, we've expanded what a GP pouch can be. The Small GP Pouch features a front pocket for storing items like VS-17 panels or SSE bags. The pouch is built with extra depth to allow for the storage of Night Vision Goggles and has been test fitted with 15s, 31s, and DTNVGS successfully. The pouch is constructed out of high quality 500d Cordura nylon. The inside of the pouch is lined with loop and accepts our Pouch Insert Suite. The Small GP Pouch is designed to mount to MOLLE or Belt Systems. For MOLLE the pouch consumes 3 Columns. For Belts it has a pass through that can accommodate 2" wide belts. Dimensions (Approximate) Height 5.5" x Width 5.5" x Depth 3" ■ 注意事項（ご購入前に必ずご確認ください） ・本商品は本物になり、海外製品のため、新品であっても擦れ・小傷・若干の汚れなどが見られる場合がございます。予めご了承ください。 ・ご利用のモニター環境により、実際の色味と異なる場合がございます。 ・迷彩柄は生地の取り位置により一点一点異なります。柄の出方はお選びいただけません。 ・製品仕様はメーカーの予告なく変更となる場合がございます。予めご了承ください。 ・お客様のご都合による返品・キャンセルはお受けできませんので、あらかじめご了承ください。

■ 商品説明 The TKO (Tourniquet, Kestrel, and Other Things) Pouch is a low-profile on body storage solutions that mounts to a single column of MOLLE. - The pouch features a hook & loop top closure that is adjustable accommodate a range of equipment and side lashing points for secure retention of sensitive items. - It is built with Nylon Laminate fabric and can provide protection against scuffs and scrapes. - The TKO Pouch is equally at home on a Micro Fight MK5, a LV-119 Molle Cummerbund, or mounted to the back end of a Mutant Pouch. If you are ordering for a MIL/LEO unit, please visit our GOVERNMENT SALES page for further info. ■ 注意事項（ご購入前に必ずご確認ください） ・本商品は本物になり、海外製品のため、新品であっても擦れ・小傷・若干の汚れなどが見られる場合がございます。予めご了承ください。 ・ご利用のモニター環境により、実際の色味と異なる場合がございます。 ・迷彩柄は生地の取り位置により一点一点異なります。柄の出方はお選びいただけません。 ・製品仕様はメーカーの予告なく変更となる場合がございます。予めご了承ください。 ・お客様のご都合による返品・キャンセルはお受けできませんので、あらかじめご了承ください。

■ 商品説明 The Liberty Dynamic Flashbang Pouch is a purpose-built storage solution for the Liberty Dynamic Flash Bang Grenade but with a rectangular profile that is similar in size to many other common items found on the battlefield, this pouch can effectively store a wide variety of other items. 556 magazines, certain ATAK devices, small radios, and cell phones will all work with this pouch. - The internal dimensions are 2” wide x 7” tall x 1” deep. However, the elastic sides on the pouch and the adjustable top allow it to accommodate larger items (i.e. a Kagwerks EUD case measuring 3.5” wide). - The MOLLE backer takes up two columns and features a split MOLLE bar on the second row so it can be configured as a belt pass-through for various belt widths. - The top flap of the pouch can be stowed inside the pouch so the user can use it as an open-top storage solution, or install the included shock cord retaining tab. - This pouch is also a great alternative to the MPRC Mk5 if you are using small handsets like the Baofeng UV-5R or similar radios. When configured with an open top and shock cord retaining tab it will accommodate aftermarket antennae and PTT wiring while maintaining access to the radios top-mounted knob. ■ 注意事項（ご購入前に必ずご確認ください） ・本商品は本物になり、海外製品のため、新品であっても擦れ・小傷・若干の汚れなどが見られる場合がございます。予めご了承ください。 ・ご利用のモニター環境により、実際の色味と異なる場合がございます。 ・迷彩柄は生地の取り位置により一点一点異なります。柄の出方はお選びいただけません。 ・製品仕様はメーカーの予告なく変更となる場合がございます。予めご了承ください。 ・お客様のご都合による返品・キャンセルはお受けできませんので、あらかじめご了承ください。

■ 商品説明 The "Fanny SACK" bridges the gap between our popular SACK Pouch and every day carry. Wear it for a full mission profile, or stash your carry gun in it while you're out in town. The Fanny SACK was designed to make critical equipment easy to access from both sides or when in a confined space like a vehicle. The Fanny SACK can also be worn on the lower back and out of the way but quickly slid around the waist when needed. The pouch features a "half zip" design, which means that your equipment will not easily fall out of the pouch even if the zipper is left unsecured. The front of the pouch features a small zippered stash pocket that is perfect for easy access to small items. The bottom of the pouch features two elastic loops that can be adjusted to hold a Tourniquet or other equipment that you may need to rapidly deploy. If bottom carry doesn't fit your mission needs, you can easily remove and reinstall the loops as necessary. Each side has a webbing loop for attaching equipment such as Gloves, carabiners or Chem Lights. The inside features soft loop fields on both sides. This makes the pouch very dynamic, giving you the ability to use our Pouch Insert Suite to fit your requirements. It also features two slide-locks that make it easy to adjust the tension of the elastic loops hanging below, as well as two internal tie-down loops for securing sensitive equipment. The two grommet holes on the bottom aid with drainage of the pouch, if submersion occurs. The Fanny SACK is designed to be worn around your waist. If you are ordering for a MIL/LEO unit, please visit our GOVERNMENT SALES page for further info. ■ 注意事項（ご購入前に必ずご確認ください） ・本商品は本物になり、海外製品のため、新品であっても擦れ・小傷・若干の汚れなどが見られる場合がございます。予めご了承ください。 ・ご利用のモニター環境により、実際の色味と異なる場合がございます。 ・迷彩柄は生地の取り位置により一点一点異なります。柄の出方はお選びいただけません。 ・製品仕様はメーカーの予告なく変更となる場合がございます。予めご了承ください。 ・お客様のご都合による返品・キャンセルはお受けできませんので、あらかじめご了承ください。

■ 商品説明 EUD Bridge The Spiritus Systems EUD Bridge is a purpose-built mounting solution designed to integrate your End User Device (EUD) seamlessly into your Chest Rig. Constructed from highly durable and lightweight CURV thermoplastic composite material and Squadron fabric, the EUD Bridge securely mounts between your chest rig shoulder straps, providing a stable and comfortable platform for mission-critical ATAK devices. Slits on the EUD Bridge allow for mounting PTTs with standard clips. In addition, there is a mounting plate kit included which allows for direct hard point mounting of a MPU5 PTT as opposed to relying on its factory gator clip. The EUD Bridge can also be used with 4-column MOLLE Admin Pouches for upper chest access when wearing a chest rig. Key Features: Centralized Mounting Point: Positions your EUD for quick, unobstructed access without interfering with weapon manipulation. Quick Mounting/Dismounting: Designed to attach or remove within seconds by using tuck tabs and snaps. MOLLE Compatibility: Works with chest rigs shoulder straps that support molle attachment. Durable Construction: Built to withstand harsh environments and extended use in the field. Low-Profile Design: Minimizes bulk while maximizing rigidity and user comfort. PTT Hard Point Mounting: An included mounting plate allows MPU5 PTT's to be flush mounted via screws.. Whether you're part of a reconnaissance team, JTAC, or controlling advanced tech on the battlefield, the Spiritus Systems EUD Bridge ensures your digital tools are exactly where you need them. ■ 注意事項（ご購入前に必ずご確認ください） ・本商品は本物になり、海外製品のため、新品であっても擦れ・小傷・若干の汚れなどが見られる場合がございます。予めご了承ください。 ・ご利用のモニター環境により、実際の色味と異なる場合がございます。 ・迷彩柄は生地の取り位置により一点一点異なります。柄の出方はお選びいただけません。 ・製品仕様はメーカーの予告なく変更となる場合がございます。予めご了承ください。 ・お客様のご都合による返品・キャンセルはお受けできませんので、あらかじめご了承ください。

■ 商品説明 The Hook. A simple method of attaching items securely where you want them. Easily stow your Gloves when not in use or use it to feed Chem Light bundles on your next objective. The Hook is designed to be utilized on the back side of your Micro Fight, or underneath the flap or Placard of a Plate Carrier. - Hook & loop surface area measures 3x4 Inches. - One side is Hook the other is Loop. Available in Jet Black only. ■ 注意事項（ご購入前に必ずご確認ください） ・本商品は本物になり、海外製品のため、新品であっても擦れ・小傷・若干の汚れなどが見られる場合がございます。予めご了承ください。 ・ご利用のモニター環境により、実際の色味と異なる場合がございます。 ・迷彩柄は生地の取り位置により一点一点異なります。柄の出方はお選びいただけません。 ・製品仕様はメーカーの予告なく変更となる場合がございます。予めご了承ください。 ・お客様のご都合による返品・キャンセルはお受けできませんので、あらかじめご了承ください。

■ 商品説明 SPUDZ Microfiber Lens Cleaning Cloth - Not to be confused with our SPUD Pouch! Features: ・Safe for all optics ・Clips anywhere ・Cloth stays attached ・Pouch protects cloth ・Removes smudges ・Machine washable ・6"x6" This genius lens cleaner cloth is attached to its stretchy and compact storage pouch, which can easily stay attached to your Plate Carrier, or the tie down in one of our Sub Abdominal Pouches or GP Pouches. The cloth is made of premium microfiber, so they are safe for even the most sensitive optics and lenses. The pouch is made of stretchy and durable neoprene that holds the cloth perfectly and keeps it protected and clean. It’s machine washable – and best yet, these are made in the USA! ■ 注意事項（ご購入前に必ずご確認ください） ・本商品は本物になり、海外製品のため、新品であっても擦れ・小傷・若干の汚れなどが見られる場合がございます。予めご了承ください。 ・ご利用のモニター環境により、実際の色味と異なる場合がございます。 ・迷彩柄は生地の取り位置により一点一点異なります。柄の出方はお選びいただけません。 ・製品仕様はメーカーの予告なく変更となる場合がございます。予めご了承ください。 ・お客様のご都合による返品・キャンセルはお受けできませんので、あらかじめご了承ください。

■ 商品説明 The Spiritus Systems Pistol Magazine Pouch was built to bridge the gap between hard plastic pouches and soft nylon pouches. - It is constructed with an internal Tegris® spine that acts as a leaf spring, keeping constant tension on the magazine. - When combined with the tacky Hank Kevlar lining, this pouch excels at keeping your mags in place without making it too difficult to draw or re-insert when needed. - The pouch comes with two hook and loop straps that enable the pouch to be mounted on a variety of belt widths, ranging from thin concealed carry belts, all the way up to 2” two-piece fighting belts. - The top of the pouch has grommets to mount a Bungee Retention Kit if desired. - Each pouch also comes with an elastic loop that can be installed over the pouch if additional retention is needed for single stack magazines, or after long periods of use. - The pouch can also be mounted directly to any MOLLE interface, but requires the use of a MALICE clip, or other mounting device (not included). - The flared opening of the pouch and semi-structured geometry provides the ideal form factor for quick draws and re-insertion, while also maintaining unbeatable retention characteristics. - Can be attached to the side of the Micro Fight Chassis MkV. ■ 注意事項（ご購入前に必ずご確認ください） ・本商品は本物になり、海外製品のため、新品であっても擦れ・小傷・若干の汚れなどが見られる場合がございます。予めご了承ください。 ・ご利用のモニター環境により、実際の色味と異なる場合がございます。 ・迷彩柄は生地の取り位置により一点一点異なります。柄の出方はお選びいただけません。 ・製品仕様はメーカーの予告なく変更となる場合がございます。予めご了承ください。 ・お客様のご都合による返品・キャンセルはお受けできませんので、あらかじめご了承ください。

■ 商品説明 VEIL Solutions MagBlock Safety Mag Block insert for AR/M4 style rifles designed to be used in dry practice for training environments, CQB training, or as a safety block for competitions that require chamber flags / safety flags. ・Will hold bolt to the rear. ・"CLEAR" writing visible with port door open - does NOT force port door open. ・Safety Orange color. ■ 注意事項（ご購入前に必ずご確認ください） ・本商品は本物になり、海外製品のため、新品であっても擦れ・小傷・若干の汚れなどが見られる場合がございます。予めご了承ください。 ・ご利用のモニター環境により、実際の色味と異なる場合がございます。 ・迷彩柄は生地の取り位置により一点一点異なります。柄の出方はお選びいただけません。 ・製品仕様はメーカーの予告なく変更となる場合がございます。予めご了承ください。 ・お客様のご都合による返品・キャンセルはお受けできませんので、あらかじめご了承ください。